Graphite


Save on Graphite at Back Bay Mining. Top brands include Graphtek, Electron Microscopy Sciences, Graphitestore, Small Parts, Unknown, & CeraMaterials. Hurry! Limited time offers. Offers valid only while supplies last.



Fine Extruded Graphite Rod, 2.25"OD x 24"L, Each
By Graphtek
In Stock
$117.43

mpn: NAC-500,

4.0 out of 5 stars with 11 reviews
Fine grain size, high density extruded graphite rod. Recommended for high temperature glass, metal and electrochemical applications: crucibles, molds, stirring rods, anodes, electrodes, bushings. Diameter tolerances: +.010'' / -.000''.Temperature: up to 5000 F (inert). Particle size: 0.008 inch. Density: 1.76 gr/cm 3. Compressive Strength: 8,100 psi. Resistivity: 0.00055 ohm/inch.


Fine Extruded Graphite Rod, 2"OD x 48"L, Each
By Graphtek
In Stock
$214.42

mpn: NAC-500,

4.4 out of 5 stars with 58 reviews
Fine grain size, high density extruded graphite rod. Recommended for high temperature glass, metal and electrochemical applications: crucibles, molds, stirring rods, anodes, electrodes, bushings. Diameter tolerances: +.010'' / -.000''.Temperature: up to 5000 F (inert). Particle size: 0.008 inch. Density: 1.76 gr/cm 3. Compressive Strength: 8,100 psi. Resistivity: 0.00055 ohm/inch.


Fine Extruded Graphite Rod, 1.75"OD x 24"L, Each
By Graphtek
In Stock
$92.40

mpn: NAC-500,

4.6 out of 5 stars with 51 reviews
Fine grain size, high density extruded graphite rod. Recommended for high temperature glass, metal and electrochemical applications: crucibles, molds, stirring rods, anodes, electrodes, bushings. Diameter tolerances: +.010'' / -.000''.Temperature: up to 5000 F (inert). Particle size: 0.008 inch. Density: 1.76 gr/cm 3. Compressive Strength: 8,100 psi. Resistivity: 0.00055 ohm/inch.


Fine Extruded Graphite Rod, 1.5"OD x 48"L, Each
By Graphtek
In Stock
$133.18

mpn: NAC-500,

4.3 out of 5 stars with 41 reviews
Fine grain size, high density extruded graphite rod. Recommended for high temperature glass, metal and electrochemical applications: crucibles, molds, stirring rods, anodes, electrodes, bushings. Diameter tolerances: +.010'' / -.000''.Temperature: up to 5000 F (inert). Particle size: 0.008 inch. Density: 1.76 gr/cm 3. Compressive Strength: 8,100 psi. Resistivity: 0.00055 ohm/inch.


Fine Extruded Graphite Rod, 1.125"OD x 24"L, Each
By Graphtek
In Stock
$53.03

mpn: NAC-500,

4.0 out of 5 stars with 30 reviews
Fine grain size, high density extruded graphite rod. Recommended for high temperature glass, metal and electrochemical applications: crucibles, molds, stirring rods, anodes, electrodes, bushings. Diameter tolerances: +.010'' / -.000''.Temperature: up to 5000 F (inert). Particle size: 0.008 inch. Density: 1.76 gr/cm 3. Compressive Strength: 8,100 psi. Resistivity: 0.00055 ohm/inch.


Fine Extruded Graphite Rod, 4"OD x 48"L, Each
By Graphtek
In Stock
$467.97

mpn: NAC-500,

4.3 out of 5 stars with 42 reviews
Fine grain size, high density extruded graphite rod. Recommended for high temperature glass, metal and electrochemical applications: crucibles, molds, stirring rods, anodes, electrodes, bushings. Diameter tolerances: +.010'' / -.000''.Temperature: up to 5000 F (inert). Particle size: 0.008 inch. Density: 1.76 gr/cm 3. Compressive Strength: 8,100 psi. Resistivity: 0.00055 ohm/inch.


Fine Extruded Graphite Rod, 3"OD x 48"L, Each
By Graphtek
In Stock
$283.78

mpn: NAC-500,

4.2 out of 5 stars with 45 reviews
Fine grain size, high density extruded graphite rod. Recommended for high temperature glass, metal and electrochemical applications: crucibles, molds, stirring rods, anodes, electrodes, bushings. Diameter tolerances: +.010'' / -.000''.Temperature: up to 5000 F (inert). Particle size: 0.008 inch. Density: 1.76 gr/cm 3. Compressive Strength: 8,100 psi. Resistivity: 0.00055 ohm/inch.


Fine Extruded Graphite Rod, 2.5"OD x 48"L, Each
By Graphtek
In Stock
$294.39

mpn: NAC-500,

4.2 out of 5 stars with 36 reviews
Fine grain size, high density extruded graphite rod. Recommended for high temperature glass, metal and electrochemical applications: crucibles, molds, stirring rods, anodes, electrodes, bushings. Diameter tolerances: +.010'' / -.000''.Temperature: up to 5000 F (inert). Particle size: 0.008 inch. Density: 1.76 gr/cm 3. Compressive Strength: 8,100 psi. Resistivity: 0.00055 ohm/inch.


Fine Extruded Graphite Rod, 2.25"OD x 48"L, Each
By Graphtek
In Stock
$246.37

mpn: NAC-500,

4.4 out of 5 stars with 23 reviews
Fine grain size, high density extruded graphite rod. Recommended for high temperature glass, metal and electrochemical applications: crucibles, molds, stirring rods, anodes, electrodes, bushings. Diameter tolerances: +.010'' / -.000''.Temperature: up to 5000 F (inert). Particle size: 0.008 inch. Density: 1.76 gr/cm 3. Compressive Strength: 8,100 psi. Resistivity: 0.00055 ohm/inch.


Graphite Rods, 12"L x 1/4" Diameter, 12/PK
By Electron Microscopy Sciences
In Stock
$78.00

mpn: 70230,

4.4 out of 5 stars with 29 reviews
Carbon Rods (graphite) with an impurity level of 2ppm or less with a maximum level element of each of 1 ppm. These rods are ideal for all TEM, SEM and all other critical applications. 1/4'' x 12''Carbon, Rods.


Fine Extruded Graphite Rod, 2.5"OD x 24"L, Each
By Graphtek
In Stock
$140.11

mpn: NAC-500,

4.1 out of 5 stars with 28 reviews
Fine grain size, high density extruded graphite rod. Recommended for high temperature glass, metal and electrochemical applications: crucibles, molds, stirring rods, anodes, electrodes, bushings. Diameter tolerances: +.010'' / -.000''.Temperature: up to 5000 F (inert). Particle size: 0.008 inch. Density: 1.76 gr/cm 3. Compressive Strength: 8,100 psi. Resistivity: 0.00055 ohm/inch.


Isomolded Graphite Plate, Ground, 0.25" H x 8" W x 8" L, Each
By Graphitestore
In Stock
$74.57

mpn: BL001285,

4.9 out of 5 stars with 42 reviews
High density, ground finish, isomolded graphite plate. Tolerances: Thickness +/- 0.001''; Length & Width +/- 0.005''. This item is suitable for making: Brazing fixtures, Glass to metal sealing fixtures, Precision ground plates, Fuel CellsParticle size: 0.0004 inch. Density: 1.82 gr/cm 3. Compressive Strength: 18,500 psi. Porosity: 8%. Isotropic structure.


Fine Extruded Graphite Rod, 1.25"OD x 48"L, Each
By Graphtek
In Stock
$112.12

mpn: NAC-500,

4.0 out of 5 stars with 58 reviews
Fine grain size, high density extruded graphite rod. Recommended for high temperature glass, metal and electrochemical applications: crucibles, molds, stirring rods, anodes, electrodes, bushings. Diameter tolerances: +.010'' / -.000''.Temperature: up to 5000 F (inert). Particle size: 0.008 inch. Density: 1.76 gr/cm 3. Compressive Strength: 8,100 psi. Resistivity: 0.00055 ohm/inch.


Fine Extruded Graphite Rod, 1" OD x 24" L, Each
By Graphtek
In Stock
$46.01

mpn: NAC-500,

4.0 out of 5 stars with 12 reviews
Fine grain size, high density extruded graphite rod. Recommended for high temperature glass, metal and electrochemical applications: crucibles, molds, stirring rods, anodes, electrodes, bushings. Diameter tolerances: +.010'' / -.000''.Temperature: up to 5000 F (inert). Particle size: 0.008 inch. Density: 1.76 gr/cm 3. Compressive Strength: 8,100 psi. Resistivity: 0.00055 ohm/inch.


Isomolded Graphite Plate, Ground, 0.25" H x 6" W x 6" L, Each
By Graphitestore
In Stock
$44.99

mpn: BL001280,

4.5 out of 5 stars with 25 reviews
High density, ground finish, isomolded graphite plate. Tolerances: Thickness +/- 0.001''; Length & Width +/- 0.005''. This item is suitable for making: Brazing fixtures, Glass to metal sealing fixtures, Precision ground plates, Fuel CellsParticle size: 0.0004 inch. Density: 1.82 gr/cm 3. Compressive Strength: 18,500 psi. Porosity: 8%. Isotropic structure.


Isomolded Graphite Plate, Ground, 0.25" H x 12" W x 12" L, Each
By Graphitestore
In Stock
$139.99

mpn: BL001290,

4.1 out of 5 stars with 36 reviews
High density, ground finish, isomolded graphite plate. Tolerances: Thickness +/- 0.001''; Length & Width +/- 0.005''. This item is suitable for making: Brazing fixtures, Glass to metal sealing fixtures, Precision ground plates, Fuel CellsParticle size: 0.0004 inch. Density: 1.82 gr/cm 3. Compressive Strength: 18,500 psi. Porosity: 8%. Isotropic structure.


Isomolded Graphite Plate, Ground, 0.125" H x 12" W x 12" L, Each
By Graphitestore
In Stock
$100.60

mpn: BL001240,

4.8 out of 5 stars with 29 reviews
High density, ground finish, isomolded graphite plate. Tolerances: Thickness +/- 0.001''; Length & Width +/- 0.005''. This item is suitable for making: Brazing fixtures, Glass to metal sealing fixtures, Precision ground plates, Fuel CellsParticle size: 0.0004 inch. Density: 1.82 gr/cm 3. Compressive Strength: 18,500 psi. Porosity: 8%. Isotropic structure.


Graphite Rectangular Bar, Oversized Tolerance, 1" Thickness, 6" Width, 6" Length
By Small Parts
In Stock
$61.64

mpn: IG8SAW1X6X6,

4.2 out of 5 stars with 56 reviews
Recommended for high temperature glass, metal and electrochemical applications: crucibles, molds, stirring rods, anodes, electrodes, and bushings.Temperature: up to 5000 F. Compressive Strength: 8,100 psi.


Kevlar Fabric - Yel-18" x 25' - 2x2 Twill WEAVE-3K/200g
By Unknown
In Stock
$189.99

mpn: 18-YB-KEV-25FT, ean: 0640978886871,

4.0 out of 5 stars with 8 reviews
KEVLAR/CARBON Fiber Aramid Fabric - 4 in wide -Twill Weave heavy duty 3K Tow, 220g/sq.meter. High strength Yellow-Black fabric with Kevlar & Carbon fiber strands running both vertical & horizontal for multi directional strength. Multi use soft and easy to shape.High Strength - 2 x 2 TWILL WEAVE. 3K TOW - (3,000 filaments) Heavy Duty. 220g/sq. meter. Thickness 0.46 mm. Multi directional weaving.


Activated Carbon Felt A4 8" x 11" (ACF1000)for Air purification,Gasoline fumes,Solvent recovery & Water treatment
By CeraMaterials
In Stock
$35.00

mpn: ACF1000,

4.2 out of 5 stars with 42 reviews
Activated carbon is a porous form of carbon which can be manufactured from a variety of carbonaceous raw materials. The activation process involves treating the raw material with steam or chemicals, thereby developing a high surface pore structure. The felt is a directly activated non-woven fibre with high surface area and good purity. It has the features of large adsorption volume, fast adsorption speed, heat-resistance, acid resistance & alkaline resistance. The regeneration for activated carb



Viewing Page 1 of 3

View more products in Raw Materials.
Feel free to Browse Our Catalog.

Browse Our Catalog




Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - backbaymining.com. All Rights Reserved.